Tips To Replace and Repair Refrigerator Door Seals

Fridge door seals are a very important component when it comes to refrigerators. This prevents cold air from escaping from the refrigerator when the door is closed. Without this tight seal, the air from your device flows to the outside and the refrigerator has to run twice so as not to change the stable atmosphere inside. 

Therefore, refrigerator door seals need to be cleaned and replaced regularly if they are worn or cracked. Depending on the make and model of the refrigerator you are using, you can find replacement commercial refrigerator door gaskets on the market.

Fixing a Refrigerator Door Seal - iFixit Repair Guide

Image Source: Google

Refrigerator seal replacement process:-

* You must remove the old seal by pulling it out of the door. You can even take photos of the old ones to find out where and how to place the new ones.

* Make sure the new one is clean without burrs or cracks.

* Start carefully at one end of the door and attach the new gasket to the door using the screws provided. When you have completed the first round, repeat this to make sure the seal is tight and there are no more gaps.

You need to monitor your utility bill to see if the job has been done properly. If the replacement is faulty, your utility bill will not reflect the change. You can also contact the company to swap out any fridge or freezer so the job gets done right the first time. The company's professionals ensure that you don't have to check your bill or keep an eye on the loose seal on the fridge door.

Leave a Reply